How To Hang It
There, you will also find a helpful video on the process from 3M–Command.
- The important part to follow carefully is how you should mount each panel to the wall: press hard at the strip points. Then remove the panel allowing the wall strip to stay on the wall. Then press and hold each of the wall strips for a full minute. Finally, let them sit for an hour while the adhesive sets. Now you can remount the panels.
- I’ve found it easiest to locate the strips on the backside bars, about 10 to 15 cm from the top & bottom, with the pull tabs facing down. (These tabs are used to remove the strips from the wall if you need to relocate the picture. They destroy the strip but save the wall.)
- I found it easiest to mount the middle panel first – level the side if you have a leveling tool. Then mount the adjacent left & right pair, visually aligning the pictures – leave about 1.5 to 2 cm gap between the panels. Finally do the same with the outboard pair.